#
# $Id: KonfigurationsDateiSL.txt,v 1.2 2005/03/07 18:01:22 precheltPCPOOL.MI.FU-BERLIN.DE Exp www-data $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no   # (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/

check_via=no   # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url", "sql://ser:mysersql@localhost/ser")
modparam("usrloc", "db_url", "sql://ser:mysersql@localhost/ser")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

   # initial sanity checks -- messages with
   # max_forwards==0, or excessively long requests
   if (!mf_process_maxfwd_header("10")) {
      sl_send_reply("483","Too Many Hops");
      break;
   };
   if ( msg:len > max_len ) {
      sl_send_reply("513", "Message too big");
      break;
   };

   # we record-route all messages -- to make sure that
   # subsequent messages will go through our proxy; that's
   # particularly good if upstream and downstream entities
   # use different transport protocol
   record_route();   
   # loose-route processing
   if (loose_route()) {
      t_relay();
      break;
   };

   # if the request is for other domain use UsrLoc
   # (in case, it does not work, use the following command
   # with proper names and addresses in it)
   if (uri==myself) {

      if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
         if (!www_authorize("192.168.0.78", "subscriber")) {
            www_challenge("192.168.0.78", "0");
            break;
         };

         save("location");
         break;
      };

      # native SIP destinations are handled using our USRLOC DB
      if (!lookup("location")) {
         sl_send_reply("404", "Not Found");
         break;
      };
   };
   # forward to current uri now; use stateful forwarding; that
   # works reliably even if we forward from TCP to UDP
   if (!t_relay()) {
      sl_reply_error();
   };

}